§

November 20, 2026

What to check before rolling out a workplace duress alarm system

By @ruralworkersafety

❦

Why preparation matters for a workplace duress alarm system

A workplace duress alarm system is only as reliable as the preparation that goes into it. When a worker is in a hazardous situation, the device needs to connect, transmit, and alert the right people without delay. If the setup is rushed or the coverage is poor, the system may fail at the moment it is needed most. Checking device setup and cellular coverage before deployment is not a nice-to-have step; it is essential to making sure the system works as intended.

What a workplace duress alarm does

A workplace duress alarm is a personal safety device that lets a worker call for help when they are alone or in a dangerous environment. It typically includes an SOS button, GPS location tracking, fall detection, and man-down alerts. When activated, the device sends a signal to a monitoring service or to designated alert contacts, who can then respond. The device relies on a cellular network to transmit that signal, which is why coverage and setup are so important.

Device setup: more than just turning it on

Setting up a lone worker monitoring device involves several steps that go beyond simply charging it and switching it on. The device must be configured with the correct alert contacts, SMS command settings, and monitoring preferences. Each of these settings affects how the device behaves in an emergency. For example, if the alert contacts are not entered correctly, the distress signal may go to the wrong person or to nobody at all. Similarly, the device needs to be paired with the right monitoring service, and the user needs to understand how to trigger an alarm and how to cancel a false one.

Another part of setup is testing the device in the actual environment where it will be used. A device that works perfectly in the office may behave differently in a remote worksite, a warehouse, or a basement. Factors like building materials, metal structures, and underground locations can interfere with cellular signals. Testing the device in the real environment helps identify these issues before they become problems.

What to check before rolling out a workplace duress alarm system

Cellular coverage: the invisible link

The cellular network is the backbone of most workplace duress alarm systems. Without a reliable signal, the device cannot send its alert, and the worker is effectively isolated. Coverage can vary significantly even within a small area. A spot that has full signal on a mobile phone may not have the same signal strength for a dedicated safety device, because the device may use a different frequency band or have a different antenna design.

Before deploying a system, it is wise to check coverage at every location where the device will be used. This includes not only the main worksite but also any outbuildings, remote areas, and routes the worker travels. A simple signal test with the actual device can reveal dead zones that need to be addressed. In some cases, a signal booster or a different carrier may be needed. In other cases, the device may need to be used in a different way, such as keeping it in a pocket that allows better signal reception.

Risk assessment and safety policy

Checking device setup and cellular coverage is part of a broader risk assessment. A safety policy should include procedures for testing the system before each shift, as well as periodic checks to ensure the device is still working correctly. The policy should also cover what to do if the device cannot get a signal, such as using a secondary communication method or notifying a supervisor. Without these procedures, the system may be used incorrectly or not at all.

Procurement decisions also play a role. When choosing a device, it is important to consider the cellular network it uses and whether that network provides adequate coverage in the areas where the device will be deployed. Some devices support multiple carriers, which can improve coverage. Others may have features like offline logging that store alerts until a signal is available, which can be useful in intermittent coverage areas.

What to check before rolling out a workplace duress alarm system

Common pitfalls and how to avoid them

One common mistake is assuming that a device that works in one location will work in another. Even within the same building, coverage can vary from floor to floor or from one side of the building to the other. Another mistake is not testing the device under the conditions in which it will be used. For example, a device worn on a belt may have different signal reception than one worn in a pocket or on a lanyard. The position of the device relative to the body can affect the signal, especially if the user is moving around.

Battery life is another factor. A device that is not fully charged or that has a degraded battery may not function properly. Checking the battery level and charging the device before deployment is a simple step that can prevent problems later. Similarly, the device should be checked for firmware updates, as manufacturers often release improvements that can fix bugs or improve performance.

Practical steps for checking before deployment

A practical approach to checking device setup and cellular coverage involves several steps. First, review the device manual and configure the settings according to the safety policy. This includes entering alert contacts, setting up SMS commands, and choosing the monitoring option. Second, test the device in the actual environment where it will be used. Walk through the worksite and trigger the alarm to see if the signal reaches the monitoring service. Third, check for dead zones and document them. If a dead zone is found, consider whether the device can be used in a different location or whether additional equipment is needed. Fourth, train the worker on how to use the device, including how to trigger an alarm, how to cancel a false alarm, and what to do if the device loses signal. Fifth, schedule regular checks to ensure the device continues to work over time.

These steps may seem simple, but they are often overlooked in the rush to get a system deployed. Taking the time to do them can make the difference between a system that works and one that fails when it is needed most.

What to check before rolling out a workplace duress alarm system

What this means for the reader

For anyone responsible for safety in a workplace where employees work alone, the message is clear: a workplace duress alarm system is not a set-and-forget tool. It requires careful setup and ongoing attention to the cellular network that carries its signals. By checking these things before deployment, you can avoid the worst-case scenario of a worker pressing the alarm and nothing happening. The goal is not just to have a device, but to have a device that works every time, in every place it is needed. That starts with preparation.

❧